The perfect solution for union halls, colleges, and trade schools where high numbers of coupons are utilized for basic weld training and for the qualification of welders using heavy wall pipe.
Tri Tool’s weld coupon machine is built around the rugged and dependable Model 208B BevelMASTER® and incorporates a strong, integral base stand for benchtop mounting.
| Pipe/Tube Size: | *1.503″ – 8.625″ (*38.1 mm – 219.0 mm) |
| Wall Thickness: | **0.875″ (22.2 mm) max |
| Drive Options: | Air 110V Electric 220V Electric Hydraulic |
| Technical Specifications | |||||||||||||||||||
| Property | Inches | Metric | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID Mouting: 2″ – XX Mandrel (option) Standard Mandrel |
*1.503″ – 1.650″ 1.630″ – 8.870″ |
*(38.1 mm – 41.9 mm) (41.4 mm – 225.3 mm) |
|||||||||||||||||
| OD Machining (max): | 8.630″ | (219.2 mm) | |||||||||||||||||
| Counterboring: | 2.000″ – 8.330″ | (50.8 mm – 211.6 mm) | |||||||||||||||||
| ID Chamfering: | 2.000″ – 8.160″ | (50.8 mm – 8.160 mm) | |||||||||||||||||
| Wall Thickness (Max): Air Electric |
**.875″ **.438″ |
**(22.2 mm) **(11.1 mm) |
|||||||||||||||||
| Axial Feed Travel: | 2.000″ | (50.8 mm) | |||||||||||||||||
| Feed Rate: (Per Revolution) | .083″ | (2.1 mm) | |||||||||||||||||
| Weight: w/ Air Motor w/ Electric Motor |
56 lbs 63 lbs |
(25.4 kg) (28.6 kg) |
|||||||||||||||||
| Cutting Head Toolbit slots: | 3 | ||||||||||||||||||
| Rotating head diameter: | 9.160″ | (232.7 mm) | |||||||||||||||||
| Height over motor: | 28.130″ | (714.5 mm) | |||||||||||||||||
| Machine Width: | 10.130″ | (257.3 mm) | |||||||||||||||||
| Length over machine | 17.950″ | (455.9 mm) | |||||||||||||||||
| Minimum Air Power requirement: | 85 cfm 90 psi |
(40.1 L/s) (621 kPa) |
|||||||||||||||||
| Minimum Electric Power | 20A@115V-50/60hz 10A@230V-50/60hz |
||||||||||||||||||
*With optional accessory included
**For larger wall thickness, contact Tri Tool Inc. for heavier wall procedures
| Documents | |||||||||||||||||||
Operating Manual: 208B CouponMaster
| Optional Accessories | |||||||||||||||||||
| Property | Inches | Metric | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID Mounting: 2″ – XX Mandrel |
1.500″ – 1.650″ | (38.1 mm – 41.9 mm) | |||||||||||||||||
| Non-marking:Sleeve Mandrel (size specific) | 2.000″ – 8.480″ | (50.8 mm – 215.4 mm) | |||||||||||||||||
| Flange Facer Kit | |||||||||||||||||||
| Elbow Mandrel Kit, Small | 1.630″ – 2.560″ | (41.4 mm – 65.0 mm) | |||||||||||||||||
| Elbow Mandrel Kit | 2.510″ – 8.400″ | (63.8 mm – 213.3 mm) | |||||||||||||||||
| Adjustable Pin Kit, Elbow Mandrel | |||||||||||||||||||
| Squaring Plate, Elbow Mandrel. | |||||||||||||||||||
| Pointer Kit, Elbow Mandrel | |||||||||||||||||||
| ID Tracking Module Kit | |||||||||||||||||||
| Miter Mandrel Kit | |||||||||||||||||||
| Dial Indicator Kit | |||||||||||||||||||
| Stainless Steel Jaw Block Kit | |||||||||||||||||||
| Air Caddy (Filter Regulator Lubricator) | |||||||||||||||||||
