Rugged, powerful portable pipe beveler machine that is able to face, counterbore, and bevel in one setup. The machine is light weight,and has adjustable torque keys that prevent cutting vibrations producing smoother cuts. Optional accessories enhance the machines capabilities for beveling elbows, performing miters, and facing flanges.
| Pipe/Tube Size: | *1.503″ – 8.625″ (*38.1 mm – 219.0 mm) |
| Wall Thickness: | **0.875″ (22.2 mm) max |
| Drive Options: | Air 110V Electric 220V Electric Hydraulic |
| Technical Specifications | |||||||||||||||||||
| Property | Inches | Metric | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID Mounting Range 2″ – XX Mandrel (optional) Standard Mandrel |
*1.503″ – 1.650″ 1.630″ – 8.870″ |
*(38.1 mm – 41.9 mm) (41.4 mm – 225.3 mm) |
|||||||||||||||||
| OD Machining (max OD) | 8.630″ | (219.2 mm) | |||||||||||||||||
| Counterboring Range | 2.000″ – 8.330″ | (50.8 mm – 211.6 mm) | |||||||||||||||||
| ID Chamfering Range | 2.000″ – 8.160″ | (50.8 mm – 8.160 mm) | |||||||||||||||||
| Wall Thickness (max) Air Electric Hydraulic |
**.875″ **.438″ **.875″ |
**(22.2 mm) **(11.1 mm) **(22.2 mm) |
|||||||||||||||||
| Axial Feed Travel | 2.000″ | (50.8 mm) | |||||||||||||||||
| Feed Rate: (Per Revolution) | .083″ | (2.1 mm) | |||||||||||||||||
| Weight w/ Air Motor w/ Electric Motor w/ Hydraulic Motor |
56 lbs 63 lbs 75 lbs |
(25.4 kg) (28.6 kg) (34.0 kg) |
|||||||||||||||||
| Cutting Head Toolbit Slots | 3 | ||||||||||||||||||
| Rotating Head Diameter | 9.160″ | (232.7 mm) | |||||||||||||||||
| Height Over Motor | 28.130″ | (714.5 mm) | |||||||||||||||||
| Machine Width | 10.130″ | (257.3 mm) | |||||||||||||||||
| Length over machine | 17.950″ | (455.9 mm) | |||||||||||||||||
| Minimum Air Power Requirement | 85 cfm 90 psi |
(40.1 L/s) (621 kPa) |
|||||||||||||||||
| Minimum Electric Power | 20A@115V-50/60hz 10A@230V-50/60hz |
||||||||||||||||||
| Hydraulic Power | 3 gpm – 15 gpm @ 1500 psi 15 gpm – 20 gpm @ 1000 psi |
(.19 L/s – .94 L/s) @ 10342 kPa (.94 L/s – 1.265 L/s) @ 6894 kPa |
|||||||||||||||||
*With optional accessory included
**For larger wall thickness, contact Tri Tool Inc. for heavier wall procedures
| Documents | |||||||||||||||||||
Operating Manual: 208B
Technical Specifications: 208B W/ Air Motor
Technical Specifications: 208B W/ Electric Motor
Technical Specifications: 208B W/ Hydraulic Motor
| Optional Accessories | |||||||||||||||||||
| Property | Inches | Metric | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID Mounting: 2″ – XX Mandrel Assembly |
1.500″ – 1.650″ | (38.1 mm – 41.9 mm) | |||||||||||||||||
| Non-marking, Sleeve Mandrel (size specific) | 2.000″ – 8.480″ | (50.8 mm – 215.4 mm) | |||||||||||||||||
| Flange Facer Kit | |||||||||||||||||||
| Elbow Mandrel Kit, Small | 1.630″ – 2.560″ | (41.4 mm – 65.0 mm) | |||||||||||||||||
| Elbow Mandrel Kit | 2.510″ – 8.400″ | (63.8 mm – 213.3 mm) | |||||||||||||||||
| Adjustable Pin Kit, Elbow Mandrel | |||||||||||||||||||
| Squaring Plate, Elbow Mandrel | |||||||||||||||||||
| Pointer Kit, Elbow Mandrel | |||||||||||||||||||
| ID Tracking Module Kit | |||||||||||||||||||
| Miter Mandrel Kit | |||||||||||||||||||
| Dial Indicator Kit | |||||||||||||||||||
| Lathe Stand Assembly | |||||||||||||||||||
| Stainless Steel Jaw Block Kit | |||||||||||||||||||
| Air Caddy (Filter Regulator Lubricator) | |||||||||||||||||||
